Siemens FIREFINDER-XLS Informazioni Techniche Scaricare il pdf (Pagina 4)

CRC-6 Controllable Relay Card

The Controllable Relay Card (Model CRC-6) is used with

the FireFinder XLS Fire Alarm Control Panel. It is designed

to provide auxiliary control of building functions such as

door holder release, elevator capture, smoke control, lock

release, etc. The CRC-6 plugs into one slot in the CC-5 or

CC-2 Card Cage. It provides six fully programmable relays.

Each relay contains one set of SPDT contacts rated at 4

Amps 30 VDC/120 VAC resistive and 3.5 amps 120 VAC

inductive (0.6 P.F.).

SIM-16 Supervised Input Module

The SIM-16 Supervised input Module is a remotely

located, general-purpose input module. It provides sixteen

input circuits for remote system monitoring. Each input

can be individually programmed as supervised (dry contact

only) or unsupervised (general purpose input.) The SIM-16

has two Form C relays. The relays and inputs are pro-

grammed using the Zeus system programming tool.

rooms. Also, the CDC-4 can be used to upgrade Siemens

conventional fire alarm panels to the FireFinder XLS

system without requiring detector replacement.

CC-5/CC-2 Card Cages

The CC-5/CC-2 card cages provide the physical mounting

location and all wiring connection points for all fire and

voice system options cards for the FireFinder-XLS system.

The CC-5 has 5 slots and the CC-2 has two slots.

All cards plugged into the CC-5/CC-2 card cage communi-

cate with other FireFinder-XLS modules via a common data

bus. Connectors are provided on the left & right side of the

CC-5 to connect a (60) pin cable for communications with

the FireFinder-XLS's operator interface, power supplies and

amplifiers modules.

All field wiring to devices and circuits terminates on the

CC-5/CC-2 card cage. All cards designed for use with the

CC-5/CC-2 route their field wiring terminations to the "top"

of the CC-5/CC-2. These connections are all power limited.

Internal wiring connections distribute 24VDC to cards or

high level audio signals (depending on application used)

connect to the "bottom" of the CC-5/CC-2. These connec-

tions are all non-power limited.

All wiring connections to the CC-5/CC-2 are to removable

terminal blocks. Terminal blocks are rated for use with wire

sized 12AWG to 24AWG. Each connector is numbered to

make wiring terminations to the correct position on the

terminal block simple and reduce the potential for wiring

errors.

CRC-6 Controllable Relay Card

SIM-16 Supervised Input Module

CC-5 Card Cage-5 SlotsCC-2 Card Cage-2 Slots

SCM-8

CDC-4

The Model CDC-4 Conventional Detector Card is used to

monitor Siemens Fire Safety conventional detectors on the

FireFinder XLS system. The CDC-4 can be used in applica-

tions where conventional detectors are more suited than

addressable detectors, like hallways or large meeting

CDC-4

SCM-8 Switch Control Module

The SCM-8 is a FireFinder XLS option module which

provides manual control of the Emergency Voice Evacua-

tion System or manual fire system control. Each SCM-8

module provides eight momentary pushbutton switches

and 16 LED's to indicate their status. Each switch is

assigned two LED's and a label to indicate the switch's

1 2 3 4 5 6 7 8 9 10 11 12

Commenti su questo manuale

Nessun commento

Siemens FIREFINDER-XLS Informazioni Techniche Pagina 4

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Siemens FIREFINDER-XLS