Siemens RUGGEDCOM RSG2200 Specifiche Scaricare il pdf (Pagina 13)

RUGGEDCOM RSG2200

Installation Guide

Chapter 2

Installing Device

Mounting the Device on a DIN Rail 7

4. Secure the adapters to the rack using the supplied hardware.

Section 2.1.2

Mounting the Device on a DIN Rail

For DIN rail installations, the RSG2200 can be equipped with panel/DIN rail adapters pre-installed on each side

of the chassis. The adapters allow the device to be slid onto a standard 35 mm (1.4 in) DIN rail.

To mount the device to a DIN rail, do the following:

1. Align the adapters with the DIN rails and slide the device into place.

Figure 3: DIN Rail Mounting

1. Panel/DIN Rail Adaptor 2. DIN Rail 3. Screw

2. Install one of the supplied screws on either side of the device to secure the adapters to the DIN rails.

Section 2.1.3

Mounting the Device to a Panel

For panel installations, the RSG2200 can be equipped with panel/DIN rail adapters pre-installed on each side of

the chassis. The adapters allow the device to be attached to a panel using screws.

To mount the device to a panel, do the following:

1. Place the device against the panel and align the adapters with the mounting holes.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 45 46

Nessun commento

Siemens RUGGEDCOM RSG2200 Specifiche Pagina 13