Siemens KVM s2-0411 Manuale Utente Pagina 48
- Pagina / 112
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Repairing damaged firmware Appendices
40
590-595-609A
5.1.4 Repairing damaged firmware
In the rare case that the firmware is damaged after a firmware upgrade (which might
happen if the appliance is turned off and turned on during the upgrade process), the
appliance will remain in boot mode. In this mode, the Power LED at the rear panel
flashes at about 1Hz, and the appliance attempts to restore the firmware over TFTP
using the following default configuration:
• TFTP client IP address 10.0.0.2
• TFTP target device IP address 10.0.0.3
• Upgrade file name equal to CMN-XXXX.fl, where XXXX is the 4-digit Compliance
Model Number (CMN) that is printed on the agency label of the appliance
5.1.4.1 Repairing damaged firmware
Connect the appliance to the TFTP target device (using a cross-over cable or hub),
which is set up with the default IP address (10.0.0.3).
Rename the upgrade file to the default file name (CMN-XXXX.fl).
The Power LED will Flash at about 2 Hz when the appliance is downloading the upgrade
file, and it will Flash at about 4 Hz when it is programming the downloaded file to Flash.
After it has successfully restored the firmware, the appliance reboots automatically and
the Power LED illuminates.
- KVM series2-0411 1
- KVM s2-0411 3
- User Guide 3
- Certified documentation 4
- Copyright and Trademarks 4
- Contents 5
- 1.1 Glossary 9
- 1.2 Notational Conventions 9
- 1.3 Features and benefits 10
- 1.3.4 Operation modes 11
- 1.3.5 Video 11
- 1.3.6 Flash upgradability 11
- 1.3.3 Security 11
- 2Installation 13
- 2.3.1 General guidelines 14
- KVM s2-0411 appliance 18
- 3 Basic operations 21
- Symbol Description 22
- 3.4 Using the OSCAR interface 23
- Key, key combination 24
- OSCAR interface 25
- 3.5.2 Assigning device types 26
- Flag Description 30
- Appendix 32
- 5.4 Technical Support 32
- 3.6.3 Upgrading the firmware 36
- 3.9.3 Starting the scan mode 39
- 3.9.4 Canceling scan mode 40
- Test Description 41
- to begin diagnostics 42
- 4.1 The Console menu 43
- 5 Appendices 45
- 5.2 UTP cabling 49
- 5.3 Technical specifications 51
- Before you call Appendices 54
- Auflage Januar 2006 57
- Copyright und Marken 58
- 1 Die KVM s2-0411-Einheit 63
- 1.3 Merkmale und Vorteile 64
- 1.3.3 Sicherheit 65
- 1.3.4 Betriebsmodi 65
- 1.3.6 Flash-Aktualisierungen 65
- 2.3.1 Allgemeine Anweisungen 69
- 1 HE-Rackplatz 69
- KVM s2-0411-Einheit 73
- 3 Normalbetrieb 75
- Symbol Beschreibung 76
- Zielgerät 77
- Taste, Tastenkombination 78
- Benutzeroberfläche 79
- Option Zweck 80
- 3.5.2 Gerätetypen zuordnen 82
- 3.5.4 Auswählen der Sprache 85
- Tastatureinstellungen 86
- Anhang 5.4 87
- Technischer Kundendienst 87
- Funktion Zweck 89
- 3.8 Anzeigen und Trennen von 92
- Benutzerverbindungen 92
- 3.9.3 Starten des Scan-Modus 95
- Test Beschreibung 96
- 4.1 Konsolenmenü 99
- 590-595-609A 100
- 5 Anhänge 101
- 5.2 UTP-Kabel 105
- Sicherheitshinweise 106
- 5.3 Technische Daten 107
- 5.4 Technischer Kundendienst 109
- Vor dem Anruf Anhänge 110
Prodotti e manuali riguardandi Interruttori KVM Siemens KVM s2-0411
Interruttori KVM Siemens KVM s2-0411 Guida Utente
(103 pagine)
(103 pagine)
Interruttori KVM Siemens s3-1621 Guida Utente
(48 pagine)
(48 pagine)
Online-power Proveedores De Energía manuales de usuario
Empezando en T
Commenti su questo manuale