Siemens EK 746 Series Istruzioni per gli Interventi Scaricare il pdf (Pagina 31)

Mounting

5.4 Mounting with mounting plate

SCALANCE W786 outdoor access point

Operating Instructions, 06/2013, A5E02280428-08

5.4.5

Fitting the mounting plate to a mast

Procedure

Figure 5-12 Mounting plate with fittings for mast mounting

Follow the steps below to fit the mounting plate to a mast:

1. Feed the fastening straps through the openings in the mounting plate (position

in the

figure above).

2. Place the fastening straps around the mast at the required position.

3. Feed the free end of the strap through the quick-release fastener. You can twist the

tensioning screw (position

in the figure above) to the side to adapt a fastening strap to

the diameter of the mast.

4. Press the tensioning screw against the fastening strap and tighten the tensioning screw,

tightening torque 4.5 Nm.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 89 90

Nessun commento

Siemens EK 746 Series Istruzioni per gli Interventi Pagina 31